home-assistant-futurehome/README.md

# Futurehome Home Assistant add-on

Futurehome add-on for Home Assistant. The add-on aims to be a complete drop-in replacement for the official Futurehome app, implementing support for all Futurehome-supported device types.

## Installation

1. Configure Local API in Smarthub settings in Futurehome app.
2. Block internet access (WAN) for the hub in your router settings (optional, but strongly recommended to block any future hub firmware updates).
3. In Home Assistant Add-on store install and start Mosquito MQTT broker (if you haven't already) (todo: is it really needed? or will it be installed automatically when enabling the mqtt integration?).
4. In Home Assistant enable MQTT integration (if you haven't already).
5. [![Open your Home Assistant instance and show the add add-on repository dialog with a specific repository URL pre-filled.](https://my.home-assistant.io/badges/supervisor_add_addon_repository.svg)](https://my.home-assistant.io/redirect/supervisor_add_addon_repository/?repository_url=https%3A%2F%2Fgithub.com%2Fadrianjagielak%2Fhome-assistant-futurehome)
6. Search for "Futurehome" in add-on store.
7. Install, configure, and run Futurehome add-on.

<!--

Notes to developers after forking or using the github template feature:
  - Make sure you adjust the 'version' key in 'example/config.yaml' when you do that.
  - Make sure you update 'example/CHANGELOG.md' when you do that.
  - The first time this runs you might need to adjust the image configuration on github container registry to make it public
  - You may also need to adjust the github Actions configuration (Settings > Actions > General > Workflow > Read & Write)
- Adjust the 'image' key in 'example/config.yaml' so it points to your username instead of 'home-assistant'.
  - This is where the build images will be published to.
- Rename the example directory.
  - The 'slug' key in 'example/config.yaml' should match the directory name.
- Adjust all keys/url's that points to 'home-assistant' to now point to your user/fork.
- Do awesome stuff!
 -->
Add repository 2025-07-21 15:20:40 +02:00			`# Futurehome Home Assistant add-on`

Add initial version of the add-on code 2025-07-21 22:28:31 +02:00			`Futurehome add-on for Home Assistant. The add-on aims to be a complete drop-in replacement for the official Futurehome app, implementing support for all Futurehome-supported device types.`
Add repository 2025-07-21 15:20:40 +02:00
Update README.md 2025-07-21 23:14:23 +02:00			`## Installation`

Update README.md 2025-07-22 00:10:57 +02:00			`1. Configure Local API in Smarthub settings in Futurehome app.`
			`2. Block internet access (WAN) for the hub in your router settings (optional, but strongly recommended to block any future hub firmware updates).`
Update README.md 2025-07-22 01:19:18 +02:00			`3. In Home Assistant Add-on store install and start Mosquito MQTT broker (if you haven't already) (todo: is it really needed? or will it be installed automatically when enabling the mqtt integration?).`
			`4. In Home Assistant enable MQTT integration (if you haven't already).`
			`5. [![Open your Home Assistant instance and show the add add-on repository dialog with a specific repository URL pre-filled.](https://my.home-assistant.io/badges/supervisor_add_addon_repository.svg)](https://my.home-assistant.io/redirect/supervisor_add_addon_repository/?repository_url=https%3A%2F%2Fgithub.com%2Fadrianjagielak%2Fhome-assistant-futurehome)`
			`6. Search for "Futurehome" in add-on store.`
			`7. Install, configure, and run Futurehome add-on.`
Add repository 2025-07-21 15:20:40 +02:00
			`<!--`

			`Notes to developers after forking or using the github template feature:`
			`- Make sure you adjust the 'version' key in 'example/config.yaml' when you do that.`
			`- Make sure you update 'example/CHANGELOG.md' when you do that.`
			`- The first time this runs you might need to adjust the image configuration on github container registry to make it public`
			`- You may also need to adjust the github Actions configuration (Settings > Actions > General > Workflow > Read & Write)`
			`- Adjust the 'image' key in 'example/config.yaml' so it points to your username instead of 'home-assistant'.`
			`- This is where the build images will be published to.`
			`- Rename the example directory.`
			`- The 'slug' key in 'example/config.yaml' should match the directory name.`
			`- Adjust all keys/url's that points to 'home-assistant' to now point to your user/fork.`
			`- Do awesome stuff!`
			`-->`