<?xml version="1.0" encoding="utf-8"?>
<!-- 
  Copyright (c) Microsoft Open Technologies, Inc. All rights reserved.
  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

  http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
-->
<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
  <PropertyGroup>
    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
    <ProductVersion>8.0.30703</ProductVersion>
    <SchemaVersion>2.0</SchemaVersion>
    <ProjectName>WinRTBarcodeReader</ProjectName>
    <ProjectGuid>{01412F36-3781-4AF0-903C-ACEA7552C99C}</ProjectGuid>
    <OutputType>winmdobj</OutputType>
    <AppDesignerFolder>Properties</AppDesignerFolder>
    <RootNamespace>WinRTBarcodeReader</RootNamespace>
    <AssemblyName>WinRTBarcodeReader</AssemblyName>
    <DefaultLanguage>en-US</DefaultLanguage>
    <FileAlignment>512</FileAlignment>
    <ProjectTypeGuids>{BC8A1FFA-BEE3-4634-8014-F334798102B3};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
    <TargetPlatformVersion>8.1</TargetPlatformVersion>
    <MinimumVisualStudioVersion>12</MinimumVisualStudioVersion>
    <TargetFrameworkVersion />
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE;NETFX_CORE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugSymbols>false</DebugSymbols>
    <DebugType>None</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE;NETFX_CORE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|ARM'">
    <DebugSymbols>true</DebugSymbols>
    <OutputPath>bin\ARM\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE;NETFX_CORE</DefineConstants>
    <NoWarn>;2008</NoWarn>
    <DebugType>full</DebugType>
    <PlatformTarget>ARM</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|ARM'">
    <OutputPath>bin\ARM\Release\</OutputPath>
    <DefineConstants>TRACE;NETFX_CORE</DefineConstants>
    <Optimize>true</Optimize>
    <NoWarn>;2008</NoWarn>
    <DebugSymbols>false</DebugSymbols>
    <DebugType>None</DebugType>
    <PlatformTarget>ARM</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x64'">
    <DebugSymbols>true</DebugSymbols>
    <OutputPath>bin\x64\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE;NETFX_CORE</DefineConstants>
    <NoWarn>;2008</NoWarn>
    <DebugType>full</DebugType>
    <PlatformTarget>x64</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x64'">
    <OutputPath>bin\x64\Release\</OutputPath>
    <DefineConstants>TRACE;NETFX_CORE</DefineConstants>
    <Optimize>true</Optimize>
    <NoWarn>;2008</NoWarn>
    <DebugSymbols>false</DebugSymbols>
    <DebugType>None</DebugType>
    <PlatformTarget>x64</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
    <DebugSymbols>true</DebugSymbols>
    <OutputPath>bin\x86\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE;NETFX_CORE</DefineConstants>
    <NoWarn>;2008</NoWarn>
    <DebugType>full</DebugType>
    <PlatformTarget>x86</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x86'">
    <OutputPath>bin\x86\Release\</OutputPath>
    <DefineConstants>TRACE;NETFX_CORE</DefineConstants>
    <Optimize>true</Optimize>
    <NoWarn>;2008</NoWarn>
    <DebugSymbols>false</DebugSymbols>
    <DebugType>None</DebugType>
    <PlatformTarget>x86</PlatformTarget>
    <UseVSHostingProcess>false</UseVSHostingProcess>
    <ErrorReport>prompt</ErrorReport>
    <Prefer32Bit>true</Prefer32Bit>
  </PropertyGroup>
  <ItemGroup>
    <Compile Include="Reader.cs" />
    <Compile Include="Properties\AssemblyInfo.cs" />
  </ItemGroup>
  <ItemGroup>
    <Reference Include="ZXing">
      <HintPath>ZXing.winmd</HintPath>
    </Reference>
  </ItemGroup>
  <PropertyGroup Condition=" '$(VisualStudioVersion)' == '' or '$(VisualStudioVersion)' &lt; '12.0' ">
    <VisualStudioVersion>12.0</VisualStudioVersion>
  </PropertyGroup>
  <Import Project="$(MSBuildExtensionsPath)\Microsoft\WindowsXaml\v$(VisualStudioVersion)\Microsoft.Windows.UI.Xaml.CSharp.targets" />
  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
       Other similar extension points exist, see Microsoft.Common.targets.
  <Target Name="BeforeBuild">
  </Target>
  <Target Name="AfterBuild">
  </Target>
  -->
</Project>